BETA

36 Amendments of Jadwiga WIŚNIEWSKA related to 2017/0332(COD)

Amendment 268 #
Proposal for a directive
Article 2 – paragraph 1 – point 3
3. 'water supplier' shall mean an entity supplying at least 10 m3 of water intended for human consumption a day as an average.
2018/06/19
Committee: ENVI
Amendment 286 #
Proposal for a directive
Article 2 – paragraph 1 – point 6
6. 'very large water supplier' shall mean a water supplier supplying at least 510 000 m3 per day or serving at least 50 000 people.
2018/06/19
Committee: ENVI
Amendment 289 #
Proposal for a directive
Article 2 – paragraph 1 – point 7
7. 'priority premises' shall mean large premises with many usershich residents are potentially exposed to water-related risks, such as hospitals, healthcare institutions, nurseries, buildings with a lodging facility, penal institutions and campgrounds, as identified by Member States.
2018/06/19
Committee: ENVI
Amendment 323 #
Proposal for a directive
Article 6 – paragraph 1 – introductory part
The parametric values set in accordance with Article 5 for the parameters listed in Annex I, parts A and B, shall be complied with:
2018/06/19
Committee: ENVI
Amendment 329 #
Proposal for a directive
Article 6 – paragraph 1 – point c a (new)
(c a) in the case of water used in a food- production undertaking, at the point where the water is used in the undertaking.
2018/06/19
Committee: ENVI
Amendment 331 #
Proposal for a directive
Article 6 – paragraph 1 a (new)
Determination of the points at which compliance is checked, in paragraph 1 point (a) is without prejudice to the choice of sampling point that may be located at any point in the supply zone or treatment facility, provided that there is no adverse change in concentration between the sampling point and the point of compliance, or there is no possibility that the tested parameter can appear.
2018/06/19
Committee: ENVI
Amendment 333 #
Proposal for a directive
Article 6 – paragraph 1 b (new)
In the case of water covered by point (a) paragraph 1, Member States shall be deemed to have fulfilled their obligations under this Article and under Articles 4 and 12(2) where it can be established that non-compliance with the parametric values set in accordance with Article 5 is due to the domestic distribution system or the maintenance thereof except in priority premises covered by Article 10.
2018/06/19
Committee: ENVI
Amendment 334 #
Proposal for a directive
Article 6 – paragraph 1 c (new)
Where paragraph 3 applies and there is a risk that water covered by point (a) of paragraph 1 would not comply with the parametric values established in accordance with Article 5, Member States shall nevertheless ensure that: (a) appropriate measures are taken to reduce or eliminate the risk of non-compliance with the parametric values, such as advising property owners of any possible remedial action they could take, and/or other measures, such as appropriate treatment techniques, are taken to change the nature or properties of the water before it is supplied so as to reduce or eliminate the risk of the water not complying with the parametric values after supply; and (b) the consumers concerned are duly informed and advised of any possible additional remedial action that they should take.
2018/06/19
Committee: ENVI
Amendment 359 #
Proposal for a directive
Article 8 – title
Hazard assessment, monitoring and management of bodies of water used for the abstraction of water intended for human consumption
2018/06/19
Committee: ENVI
Amendment 405 #
Proposal for a directive
Article 9 – title
Supply risk assessment, monitoring and management
2018/06/19
Committee: ENVI
Amendment 406 #
Proposal for a directive
Article 9 – paragraph 1 – subparagraph 1
Member States shall ensure that water suppliers perform a supply risk assessment providing for the possibility to adjust the monitoring frequency for any parameter listed in Annex I, pbased on the general principles of risk assessment set out in international standartds A and B that are not core parameters according to part B of Annex II, depending on their occurrence in the raw watersuch as standard EN 15975-2 concerning ‘security of drinking water supply, guidelines for risk and crisis management'.
2018/06/19
Committee: ENVI
Amendment 411 #
Proposal for a directive
Article 9 – paragraph 1 – subparagraph 2
For those parameters Member States shall ensure that water suppliers can deviate from the sampling frequencies set out in Annex II, part B, in accordance with the specifications set out in Annex II, part CBased on the outcome of the supply risk assessment and taken into account the results of the risk assessment carried out in accordance with Article 8 of this Directive and of the monitoring carried out pursuant to Article 7(1) and Article 8 of Directive2000/60/EC, water suppliers shall: a) elaborate and adjust monitoring programmes pursuant to Article 11 (a) in accordance with the specifications set out in Annex II ; b) take all necessary measures to ensure that the migration of substances or chemicals from construction products or that other products or chemicals used in the preparation or distribution of water intended for human consumption does not, either directly or indirectly, endanger human health; c) take all necessary preventive and mitigation measures to ensure that the supply and use of water intended for human consumption does not, either directly or indirectly, endanger human health.
2018/06/19
Committee: ENVI
Amendment 412 #
Proposal for a directive
Article 9 – paragraph 1 – subparagraph 3
To that end, water suppliers shall be required to take into account the results of the hazard assessment carried out in accordance with Article 8 of this Directive and of the monitoring carried out pursuant to Article 7(1) and Article 8 of Directive 2000/60/EC.deleted
2018/06/19
Committee: ENVI
Amendment 418 #
Proposal for a directive
Article 10 – title
Domestic Distribution Risk Assessment, monitoring and management
2018/06/19
Committee: ENVI
Amendment 462 #
Proposal for a directive
Article 11 – paragraph 1
1. Member States shall take all measures necessary to ensure that regular monitoring of the quality of water intended for human consumption is carried out, in order to check that the water available to consumers meets the requirements of this Directive at the point of compliance determined in accordance with Article 6 and in particular the parametric values set in accordance with Article 5. Samples shall be taken so that they are representativeevenly spread over time providing monitoring of the quality of the water consumed throughout the year. In addition, Member States shall take all measures necessary to ensure that, where disinfection forms part of the preparation or distribution of water intended for human consumption, the efficiency of the disinfection treatment applied is verified, and that any contamination from disinfection by- products is kept as low as possible without compromising the disinfection.
2018/06/19
Committee: ENVI
Amendment 472 #
Proposal for a directive
Article 12 – paragraph 1
1. Member States shall ensure that any failure to meet the parametric values set in accordance with Article 5 at the point of compliance determined in accordance with Article 6 is immediately investigated in order to identify the cause.
2018/06/19
Committee: ENVI
Amendment 474 #
Proposal for a directive
Article 12 – paragraph 2 – subparagraph 1
If, despite the measures taken to meet the obligations imposed in Article 4(1), water intended for human consumption does not meet the parametric values set in accordance with Article 5 at the point of compliance determined in accordance with Article 6, the Member State concerned shall ensure that the necessary remedial action is taken as soon as possible to restore its quality and shall give priority to their enforcement action, having regard inter alia to the extent to which the relevant parametric value has been exceeded and to the potential danger to human health..
2018/06/19
Committee: ENVI
Amendment 477 #
Proposal for a directive
Article 12 – paragraph 3 – subparagraph 1
Regardless of whether any failure to meet the parametric values at the point of compliance determined in accordance with Article 6 has occurred, Member States shall ensure that any supply of water intended for human consumption which constitutes a potential danger to human health is prohibited or its use restricted and that any other remedial action is taken that is necessary to protect human health.
2018/06/19
Committee: ENVI
Amendment 494 #
Proposal for a directive
Article 12 a (new)
Article 12 a Derogations 1. Member States may in the case of: (a) the establishing of a new water supply area, (b) water supply area of supply which, as of the date of accession of a Member State to the European Union, did not comply with the water quality parameters, (c) setting new parameters or new values for existing parameters; provide for derogations from the parametric values set out in Annex I, Part B or established in accordance with the provisions of Article 5 paragraph 3 up to the maximum value to be determined by them, provided that no derogation presents a potential danger to human health and provided that the supply of water intended for human consumption in the area concerned cannot be maintained by any other legitimate means. Derogations are limited to the shortest possible period, which may not exceed three years, and at the end of the review, to determine whether sufficient progress has been achieved. Where a Member State intends to grant a second derogation, it shall notify the Commission of the review with the reasons for the decision on the second derogation. The second derogation may not exceed three years. 2. All derogations granted in accordance with paragraph 1 shall contain the following information: (a) the reasons for the derogation; (b) the parameter for which the derogation is granted, the results of the previous relevant monitoring and the maximum limit value under the derogation; (c) the geographical area, the amount of water supplied each day, the population concerned and whether this would affect all relevant food production businesses; (d) an appropriate monitoring system, with an increased monitoring frequency, if necessary; (e) a summary of the plan to carry out the necessary remedial actions, including work schedule and cost assessment and review provisions; and(f) the required period for granting the derogation. 3. If the competent authority considers non-compliance with the parametric values to be negligible and if the corrective measures taken in accordance with Article 12 paragraph 2 are sufficient to solve the problem within a maximum of 30 days, the requirements of paragraph 2 of this article shall not be given in derogation. In this case, the competent authorities or other authorities indicated in the derogation set only the maximum allowable value for a given parameter and the deadline set for solving the problem. 4. Referring to paragraph 3 is forbidden, if the failure to meet any of the parametric values for a given water supply occurred more than jointly for 30 days during the twelve preceding months. 5. Any Member State which has made use of the derogations provided for in this Article shall ensure that the population concerned by such a derogation is briefly and adequately informed about the derogation and the rules governing them. In addition, the Member State shall, where necessary, provide advice to specific groups of the population for which the derogation may pose a particular risk. These obligations are not applicable in the circumstances described in paragraph 3, unless the competent authorities decide otherwise. 6. With the exception of derogations granted in accordance with paragraph 3 Member State shall, within two months, notify the Commission of any derogation granted for individual water deliveries exceeding an average of 1 000 m3 per day or for more than 5 000 persons, including the communication of the information specified in paragraph 2. 7. This Article shall not apply to water intended for human consumption offered for sale in bottles or containers.
2018/06/19
Committee: ENVI
Amendment 571 #
Proposal for a directive
Article 14 – paragraph 1
1. Member States shall ensure that adequate and up- to-date information on water intended for human consumption is available online to all persons supplied, in accordance with Annex IV.
2018/06/19
Committee: ENVI
Amendment 669 #
Proposal for a directive
Article 15 – paragraph 1 – subparagraph 1 – point b – point i
(i) the abstraction points identified under Article 8(1)(a);deleted
2018/06/19
Committee: ENVI
Amendment 701 #
Proposal for a directive
Article 22 a (new)
Article 22 a Transitional period 1. Member States shall take the measures necessary to ensure monitoring parameters set in Annex I, part B: Chlorate, Chlorite, Haloacetic Acids, Microcystin-LR, PFAS,PFAS-total, Uranium, by [3 years after end-date for transposition]. 2. Member States shall take the measures necessary to ensure that water intended for human consumption complies with the parametric values set in Annex I, part B, for the following parameters: Chlorate, Chlorite, Haloacetic Acids, Microcystin- LR,PFAS, PFAS-total, Uranium, by [6 years after end-date for transposition]. 3. During this transitional period, water suppliers shall not be obliged to carry out a supply risk assessment for the parameters listed in the first paragraph.
2018/06/19
Committee: ENVI
Amendment 704 #
Proposal for a directive
Article 23 – paragraph 2
2. Derogations granted by Member States in accordance with Article 9 of Directive 98/83/EC that are still applicable by [end-date for transposition of this Directive] shall remain applicable until the end of their duration. They may not be renewed further.
2018/06/19
Committee: ENVI
Amendment 707 #
Proposal for a directive
Annex I – part A – table
Parameter Parametric value Unit Clostridium perfringens 0 Number/100 ml spores Coliform bacteria 0 Number/100 ml 1 2 Enterococci2 0 Number/100 ml Escherichia coli (E. coli) 2 0 Number/100 ml Heterotrophic plate No abnormal change counts (HPC) 22o Somatic coliphages 2 0 Number/100 ml Turbidity <1 NTU __________________ 1. This parameter doesn’t need to be measured unless the water originates from or is influenced by surface water. In the event of non-compliance with this parametric value, the Member State concerned must investigate the supply to ensure that there is no potential danger to human health arising from the presence of pathogenic microorganisms, e.g. cryptosporidium. 2. The parameter is not tested in the spring water.
2018/07/02
Committee: ENVI
Amendment 709 #
Proposal for a directive
Annex I – part B – table
Chemical parameters Parameter Parametric value Unit Notes Acrylamide 0,10 μg/l The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water. Antimony 5,0 μg/l Arsenic 10 μg/l Benzene 1,0 μg/l Benzo(a)pyrene 0,010 μg/l Beta-estradiol 0,001 μg/l (50-28-2) Bisphenol A 0,01 μg/l Boron 1,0 mg/l Bromate 10 μg/l Cadmium 5,0 μg/l Chlorate 0,25 mg/l Chlorite 0,25 mg/l Chromium 25 μg/l The value shall be met, at the latest, by [10 years after the entry into force of this Directive]. The parametric value for chromium until that date is 50 μg/l. Copper 2,0 mg/l Cyanide 50 μg/l 1,2- 3,0 μg/l dichloroethane Epichlorohydrin 0,10 μg/l The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water. Fluoride 1,5 mg/l Haloacetic acids 80 μg/l Sum of the (HAAs) following nine representative substances: monochloro-, dichloro-, and trichloro-acetic acid, mono- and dibromo-acetic acid, bromochloroaceti c acid, bromodichloroace tic acid, dibromochloroaet ic acid and tribromoacetic acid. Lead 5 μg/l The value shall be met, at the latest, by [10 years after the entry into force of this Directive]. The parametric value for lead until that date is 10 μg/l. Mercury 1,0 μg/l Microcystin-LR 10 μg/l Nickel 20 μg/l Nitrate 50 mg/l Member States shall ensure that the condition [nitrate]/50 + [nitrite]/3 ≤ 1, where the square brackets signify the concentrations in mg/l for nitrate (NO3) and nitrite (NO2), is complied with and that the value of 0,10 mg/l for nitrites is complied with ex water treatment works. Nitrite 0.50 mg/l Member States shall ensure that the condition [nitrate]/50 + [nitrite]/3 ≤ 1, where the square brackets signify the concentrations in mg/l for nitrate (NO3) and nitrite (NO2), is complied with and that the value of 0,10 mg/l for nitrites is complied with ex water treatment works. Nonylphenol 0,3 μg/l Pesticides 0,10 μg/l ‘Pesticides’ means: organic insecticides, organic herbicides, organic fungicides, organic nematocides, organic acaricides, organic algicides, organic rodenticides organic slimicides, related products (inter alia, growth regulators) and their relevant metabolites as defined in Article 3(32) of Regulation (EC) No 1107/20091. The parametric value applies to each individual pesticide. In the case of aldrin, dieldrin, heptachlor and heptachlor epoxide, the parametric value is 0,030 μg/l. Pesticides — 0,50 μg/l ‘Pesticides — Total Total’ means the sum of all individual pesticides, as defined in the previous row, detected and quantified in the monitoring procedure. PFAS 0,10 μg/l 'PFAS' means each individual per- and polyfluoroalkyl substance (chemical formula: CnF2n+1−R). PFASs - Total 0,50 μg/l 'PFASs Total' means the sum of per- and polyfluoroalkyl substances (chemical formula: CnF2n+1−R). Polycyclic 0,10 μg/l Sum of aromatic concentrations of hydrocarbons the following specified compounds: benzo(b)fluoranth ene, benzo(k)fluoranth ene, benzo(ghi)peryle ne, and indeno(1,2,3- cd)pyrene. Selenium 10 μg/l Tetrachloroethene 10 μg/l Sum of and concentrations of trichloroethene specified parameters Trihalomethanes 100 μg/l Where possible, — Total without compromising disinfection, Member States shall strive for a lower value. Sum of concentrations of the following specified compounds: chloroform, bromoform, dibromochlorome thane, bromodichlorome thane. Uranium 30 μg/l Vinyl chloride 0,50 μg/l The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water. __________________ 1. Regulation (EC) No 1107/2009 of the European Parliament and of the Council of 21 October 2009 concerning the placing of plant protection products on the market and repealing Council Directives 79/117/EEC and 91/414/EEC (OJ L 309 24.11.2009, p. 1). Chemical parameters Parameter Parametric value Unit Notes Acrylamide 0,10 μg/l The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water. The parameter is not tested in the spring water. Antimony 5,0 μg/l Arsenic 10 μg/l Benzene 1,0 μg/l The parameter is not tested in the spring water. Benzo(a)pyrene 0,010 μg/l Beta-estradiol 0,001 μg/l (50-28-2) Bisphenol A 0,01 μg/l Boron 2,4 mg/l The parameter is not tested in the spring water. Bromate 10 μg/l The parameter is not tested in the spring water. Cadmium 5,0 μg/l Chlorate 0,7 mg/l The parameter is tested in case of disinfecting water with chlorine dioxide or hypochlorite. This parameter should be absent in bottled spring water as referred to in Directive 2009/54/EC. Chlorite 0,7 mg/l The parameter is tested in case of disinfecting water with chlorine dioxide or hypochlorite. This parameter should be absent in bottled spring water as referred to in Directive 2009/54/EC. Chromium 25 μg/l The value shall be met, at the latest, by [10 years after the entry into force of this Directive]. The parametric value for chromium until that date is 50 μg/l. Copper 2,0 mg/l Cyanide 50 μg/l The parameter is not tested in the spring water. 1,2- 3,0 μg/l The parameter is dichloroethane not tested in the spring water. Epichlorohydrin 0,10 μg/l The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water. The parameter is not tested in the spring water. Fluoride 1,5 mg/l Haloacetic acids 80 μg/l Sum of the (HAAs) following nine representative substances: monochloro-, dichloro-, and trichloro-acetic acid, mono- and dibromo-acetic acid, bromochloroaceti c acid, bromodichloroace tic acid, dibromochloroaet ic acid and tribromoacetic acid. The parameter is tested in case of disinfecting water with chlorine dioxide or hypochlorite. This parameter should be absent in bottled spring water as referred to in Directive 2009/54/EC Lead 5 μg/l Member States shall strive for a value as low as possible. Mercury 1,0 μg/l The parameter is not tested in the spring water. Microcystin-LR 10 μg/l This parameter need not be measured unless the water originates from or is influenced by surface water and its presence has been confirmed in monitoring carried out in accordance with Article 7 paragraph 1 and Article 8 of Directive 2000/60 / EC. The parameter is not tested in the spring water. Nickel 20 μg/l Nitrate 50 mg/l Member States shall ensure that the condition [nitrate]/50 + [nitrite]/3 ≤ 1, where the square brackets signify the concentrations in mg/l for nitrate (NO3) and nitrite (NO2), is complied with and that the value of 0,10 mg/l for nitrites is complied with ex water treatment works. Nitrite 0.50 mg/l Member States shall ensure that the condition [nitrate]/50 + [nitrite]/3 ≤ 1, where the square brackets signify the concentrations in mg/l for nitrate (NO3) and nitrite (NO2), is complied with and that the value of 0,10 mg/l for nitrites is complied with ex water treatment works. Nonylphenol 0,3 μg/l Pesticides 0,10 μg/l ‘Pesticides’ means: organic insecticides, organic herbicides, organic fungicides, organic nematocides, organic acaricides, organic algicides, organic rodenticides organic slimicides, related products (inter alia, growth regulators) and their relevant metabolites as defined in Article 3(32) of Regulation (EC) No 1107/20091. The parametric value applies to each individual pesticide. In the case of aldrin, dieldrin, heptachlor and heptachlor epoxide, the parametric value is 0,030 μg/l. Pesticides — 0,50 μg/l ‘Pesticides — Total Total’ means the sum of all individual pesticides, as defined in the previous row, detected and quantified in the monitoring procedure. PFAS 0,10 μg/l 'PFAS' means each individual per- and polyfluoroalkyl substance (chemical formula: CnF2n+1−R). The parameter is not tested in the spring water. PFASs - Total 0,50 μg/l 'PFASs Total' means the sum of per- and polyfluoroalkyl substances (chemical formula: CnF2n+1−R). The parameter is not tested in the spring water. Polycyclic 0,10 μg/l Sum of aromatic concentrations of hydrocarbons the following specified compounds: benzo(b)fluoranth ene, benzo(k)fluoranth ene, benzo(ghi)peryle ne, and indeno(1,2,3- cd)pyrene. Selenium 10 μg/l The parameter is not tested in the spring water. Tetrachloroethene 10 μg/l Sum of and concentrations of trichloroethene specified parameters. The parameter is not tested in the spring water. Trihalomethanes 100 μg/l Where possible, — Total without compromising disinfection, Member States shall strive for a lower value. Sum of concentrations of the following specified compounds: chloroform, bromoform, dibromochlorome thane, bromodichlorome thane. Uranium 30 μg/l The parameter is not tested in the spring water. Vinyl chloride 0,50 μg/l The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water. The parameter is not tested in the spring water. __________________ 1. Regulation (EC) No 1107/2009 of the European Parliament and of the Council of 21 October 2009 concerning the placing of plant protection products on the market and repealing Council Directives 79/117/EEC and 91/414/EEC (OJ L 309 24.11.2009, p. 1).
2018/07/02
Committee: ENVI
Amendment 727 #
Proposal for a directive
Annex I – part B a (new)
Indicator parameters Parameter Parametric value Unit Notes Coliform bacteria 0 CFU/100 ml See Note 2 Heterotrophic No abnormal See Note 2 plate counts 22o change Aluminium 200 μg/l See Note 2 Ammonium 0,50 mg/l See Note 2 Chloride 250 mg/l See Note 1 Colour Acceptable to See Note 2 consumers and no abnormal change Conductivity 2500 μS cm-1 at 20 °C See Note 1 Hydrogen ion ≥ 6,5 i ≤ 9,5 pH units See Note 1, 2 i 3 concentration Iron 200 μg/l Manganese 50 μg/l Odour Acceptable to See Note 2 consumers and no abnormal change Oxidisability 5,0 mg/l O2 See Note 2, 4 Sulphate 250 mg/l See Note 1 Sodium 200 mg/l Taste Acceptable to See Note 2 consumers and no abnormal change Total organic No abnormal See Note 5,2 carbon (TOC) change Note 1: The water should not be aggressive. Note 2: The parameter is not tested in the spring water. Note 3: For still water put into bottles or containers, the minimum value may be reduced to 4,5 pH units. For water put into bottles or containers which is naturally rich in or artificially enriched with carbon dioxide, the minimum value may be lower. Note 4: This parameter doesn’t need to be measured if the parameter TOC is analysed. Note 5: This parameter doesn’t need to be measured for supplies of less than 10000 m3 a day. Note 6: In the case of surface water treatment, Member States should strive for a parametric value not exceeding 1,0 NTU (nephelometric turbidity units) in the water ex treatment works.
2018/07/02
Committee: ENVI
Amendment 730 #
Proposal for a directive
Annex I – part C
Parameters relevant for the domestic distribution risk assessment Parameter Parametric value Unit Notes Legionella1 < 1 000 Number/l In case the CFU/l Lead 10 μg/l parametric valueMember States <1000/l is not met for Legionella, resampling for Legionella pneumophila shall be done. If Legionella pneumophila is not present, the parametic value for Legionella is <10 000/l Lead 5 μg/l The value shall be met, at the latest, by ... [ten years after the date of entry into force of this Directive]. The parametric value for lead until that date is 10 μg/l. shall strive for a value as low as possible. 1 Testing for Legionella should be performed in warm water > 20 ° C.
2018/07/02
Committee: ENVI
Amendment 734 #
Proposal for a directive
Annex II – part B – point 1 – paragraph 1
Escherichia coli (E. coli), Clostridium perfringens spores, and somatic coliphages are considered 'core parameters' and may not be subject to a supply risk assessment in accordance with part C of this Annex. They shall always be monitored at the frequencies set out in Table 1 of point 2. Group A The following parameters shall be monitored in accordance with the monitoring frequencies set out in Table 1 of point 2: (a) Escherichia coli (E. coli), enterococci (in the case of the exceedance of this parameter in the past or the location of the water supplier in rural areas), coliform bacteria, colony count 22°C, colour, turbidity, taste, odour, pH, conductivity; (b) other parameters identified as relevant in the monitoring programme, in accordance with Article 5(3) and, where relevant, through a risk assessment as set out in Part C. Under specific circumstances, the following parameters shall be added to the Group A: (a) ammonium and nitrite, if chloramination is used; (b) aluminium and iron, if used as water treatment chemicals. Escherichia coli (E. coli) and enterococci, are considered 'core parameters' and may not be subject to a supply risk assessment in accordance with part C of this Annex. They shall always be monitored at the frequencies set out in Table 1 of point 2. Group B In order to determine compliance with all parametric values set out in this Directive, all other parameters not analysed under Group A and set in accordance with Article 5 shall be monitored at least at the frequencies set out in Table 1 of point 2, excluding the parameters of group C. Group C Microcystin-LR is necessary for monitoring in case of confirmation of its occurrence in monitoring carried out in accordance with art. 7 par. 1 and Article 8 of Directive 2000/60/EC.
2018/07/02
Committee: ENVI
Amendment 740 #
Proposal for a directive
Annex II – part B – point 2 – table 1
Table 1 Minimum frequency of sampling and analysis for compliance monitoring Volume (m3) of water distributed Minimum number of samples per year Group A Group B parameters or produced each day within a supply zoneparameters frequency of sampling supply zone (See Notes 1 and 2) frequency of per year m3 sampling per year (See Note 3) (See Note 3) ≤ 100 10a> 0 (See Note 4) > 0 (See Note 4) > 100 1 000 4 10a 1 > 1 000 10 000 50b 10 000 ≤100 000 365 for each 1000 1+1 m3/d and part thereof of the for each 4500 m3/d and total part thereof of the total volume volume >10 000 ≤ 100 000 3+1 for each 10 000 m3/d and part thereof of the total volume > >100 000 365 a: all samples are to be taken during times when the risk of treatment breakthrough of enteric pathogens is high. b: at least 10 samples are to be taken during times when the risk of treatment breakthrough of enteric pathogens is high. 12 + 1 for each 25 000 m3/d and part thereof of the total volume Note 1: A supply zone is a geographically defined area within which water intended for human consumption comes from one or more sources and water quality may be considered as being approximately uniform. Note 2: The volumes are calculated as averages taken over a calendar year. The number of inhabitants in a supply zone may be used instead of the volume of water to determine the minimum frequency, assuming water consumption of 200 l/(day*capita). Note 3: The frequency indicated is calculated as follows: e.g. 4300 m3/d = 16 samples (four for the first 1000 m3/d + 12 for additional 3300 m3/d). Note 4: Member States that have decided to exempt individual supplies under Article 3(2)(b) shall apply these frequencies only for supply zones that distribute between 10 and 100 m3 per day.
2018/07/02
Committee: ENVI
Amendment 743 #
Proposal for a directive
Annex II – part C – point 1
1. The supply risk assessment referred to in Article 9 shall be based on the general principles of risk assessment set out in international standards such as standard EN 15975-2 concerning ‘security of drinking water supply, guidelines for risk and crisis management’.deleted
2018/07/02
Committee: ENVI
Amendment 744 #
Proposal for a directive
Annex II – part C – point 3 – point b
(b) for reducing the minimum sampling frequency of a parameter the results obtained from samples collected at regular intervals over a period of at least 3 years, subject to the parameter of group C referred to in part B of Annex II, from sampling points representative of the whole supply zone are all less than 60 % of the parametric value;
2018/07/02
Committee: ENVI
Amendment 745 #
Proposal for a directive
Annex II – part C – point 3 – point c
(c) for removing a parameter from the list of parameters to be monitored the results obtained from samples collected at regular intervals over a period of at least 3 years, subject to the parameter of group C referred to in part B of Annex II, from points representative of the whole supply zone are all less than 30 % of the parametric value;
2018/07/02
Committee: ENVI
Amendment 752 #
Proposal for a directive
Annex III – part B – point 1 – table 1 – row 6
Beta-estradiol (50-28-2) 50 deleted
2018/07/02
Committee: ENVI
Amendment 753 #
Proposal for a directive
Annex III – part B – point 1 – table 1 – row 7
Bisphenol A 50 deleted
2018/07/02
Committee: ENVI
Amendment 754 #
Proposal for a directive
Annex III – part B – point 1 – table 1 – row 26
Nonylphenol 50 deleted
2018/07/02
Committee: ENVI
Amendment 765 #
Proposal for a directive
Annex IV – paragraph 1 – point 2 – introductory part
(2) the most recent monitoring results for parameters listed in Annex I, parts A, B and Ba, including frequency and location of sampling points, relevant to the area of interest to the person suppliedat the point of compliance determined in accordance with Article 6 , together with the parametric value set in accordance with Article 5. The monitoring results must not be older than:
2018/07/02
Committee: ENVI